Master the Art of Keeping a Clean Nozzle on Your 3D Printing Device
Master the Art of Flawless 3D Printing: No More Blisters or Pimples
Blobs are excessive deposits of melted filament that appear as small and irregular protrusions on the print’s surface. It occurs mainly when the extruder deposits more material than necessary at specific points due to factors like inconsistent extrusion, incorrect retraction settings, and or insufficient cooling. Zits, on the other hand, are tiny imperfections that look like scars on the surface of a 3D print, and they can also come as a result of inconsistent extrusion, changes in 3D print speed, and variations in cooling, even if you’re using one of thebest 3D printers . Zits are generally smaller than blobs, but they still compromise the overall look of the print and affect the print’s surface finish. You can fix these issues by implementing the following strategies.
1. Ensure There is Proper Cooling of the Layers
If the layers are overheated due to poor cooling, the excess melted filament will form the blobs on the printed object. You need to optimize the cooling settings to be consistent on all the sections of your 3D print.
It’s also advisable to increase the fan’s speed to prevent overheating of the layers before the next ones are deposited, which leads to excess melted filament, which later forms blobs on the object.
2. Optimize Retraction Settings
Retraction plays an essential role in pulling the filament back slightly when the nozzle is not moving between different locations. This helps prevent oozing which can result in blobs and other issues likestringing in 3D prints .
When adjusting the retraction, you need to consider the retraction speed which determines how quickly the filament is retracted back and the retraction distance, which determines the amount of filament pulled back to the nozzle. When the retraction settings are inadequate, small bumps can occur because of the pressure variations on the extruder when the nozzle is not extruding, especially when moving on the empty spaces, leaving behind filament due to oozing. So you need to experiment and get the perfect retraction distance and speed to prevent unwanted material residuals from being deposited on the surface of the print.
The standard retraction distance is usually around 2 to 7 mm, and the speed ranges from 30 to 60 mm/s. You can find these settings on your 3D printer slicer. For example, in Cura, you have to ensure that you check theEnable Retraction box.
(Image credit: Tom’s Hardware)
As you make the adjustments, you can also 3D print aretraction test model and use it to adjust the settings until you achieve the sweet spot.
Stay On the Cutting Edge: Get the Tom’s Hardware Newsletter
Get Tom’s Hardware’s best news and in-depth reviews, straight to your inbox.
Contact me with news and offers from other Future brands Receive email from us on behalf of our trusted partners or sponsors
By submitting your information you agree to theTerms & Conditions andPrivacy Policy and are aged 16 or over.
(Image credit: Tom’s Hardware)
You can begin with a lower retraction distance, like 2mm, print the model, and then check how it appears. It might have strings and other imperfections, and you can continue increasing by 0.5mm until you see improvement. You can then shift to retraction speed and start with a lower value, like 30 mm/s, and increase it gradually as you observe how the prints appear until you find the optimal value.
3. Use Coasting
When you activate coasting settings, it stops the extruding filament slightly before the end of the path when the nozzle is about to travel over an area without printing. This is helpful as it minimizes the pressure build-up in the nozzle, which causes the filament to ooze out and turn into blobs or zits. You can find the coasting setting in theExperimental section, and check theEnable coasting box to activate it.
(Image credit: Tom’s Hardware)
When you enable it, other settings appear, likeCoasting Volume ,Minimum Volume Before Coasting , andCoasting Speed .
Glary Utilities PRO - Premium all-in-one utility to clean, speed up, maintain and protect your PC
(Image credit: Tom’s Hardware)
Coasting volume is the amount or size of the material that is not extruded at the end of each layer. You need to find the appropriate value because if it’s too high, the printer might not extrude enough filament, resulting in under-extrusion.
If it’s too low, there will be a build-up of pressure on the nozzle, so you need to tweak it until you get the correct value. The default value is around 0.064mm³. To get the correct value, multiply the nozzle width, layer height, and length at a certain height. For example, if the nozzle width is 0.4mm, layer height is 0.2mm, and an extrusion path is around 0.8, when you multiply them, you will get 0.064. You can increase in small increments until you find the appropriate value.
Minimum Volume Before Coasting refers to the minimum material size that should be there for the slicer to apply coasting. The default value is around 0.8mm³, which works great for most prints.Coasting speed on the other hand is the speed at which the nozzle moves when it is coasting. It’s usually relative to the printing speed, and using a slightly lower value than 100%, like 90% is advisable.
As you enable coasting to eliminate blobs and zits, you need to remember that its effectiveness depends on the geometry of your 3D model, 3D printing speed, and the type of filament you are using. So you need to tweak the settings until you achieve the best results.
4. Adjust 3D printing Speed and Temperature
Adjusting how fast your 3D printer prints as well as the temperature you are using can also help fix the issue as these settings influence the extrusion rate and the cooling time for the layers. A higher 3D printing speed than necessary can result in increased pressure in the nozzle, which can cause the excess filament to ooze out, causing issues on the print as the nozzle moves.
The standard speed is usually between 50-60 mm/s, and anything above this can result in problems. If the temperature is too high, the filament can become too fluid and start oozing out. Alternatively, if it is too low, there can be incomplete melting which results in uneven extrusion which causes irregularities and inconsistencies in the printed layers. You must adjust the temperature until you find the perfect settings for your filament and printer.
5. Disable Power Recovery Feature
If none of the above options don’t work, you should consider turning off the power recovery option if it’s turned on. Even though this feature helps save your 3D print instead of starting to print from scratch in case of power interruption, it can introduce blobs. This is because when the feature is activated, the 3D printers utilize the SD card to write “check-points” or the print job state to the card, which will help in resuming the print and this might start competing with the standard printing operation, resulting in blobs.
Turning this feature on is not easy as not all thebest 3D printers have that option on the menu, and you need to use the SD card. Luckily, a YouTuber, Geek Detour, createdG-code files for enabling and disabling power recovery and you can download and save them to your SD card and use them. You can also choose to buy a UPS battery to address power challenges if you don’t want the challenge of your print being affected due to power loss.
Related 3D PrintingTutorials
More: 5 Ways Fix Z Banding in 3D Printing
More: How to Use FreeCAD for 3D Printing
More: How to Convert OBJ Files to STL Files for 3D Printing
More: How to Use PrusaSlicer: A Beginners Guide
Also read:
- [New] 20 Gratis + Purchasable LUTs Enhance Canon Cams
- [New] Budding Entrepreneurs Guide Mastering the Art of Social Media Advertising
- [New] In 2024, Apple's Innovation The M1 Max Clip Explained
- [New] In 2024, From Basics to Brilliance Mastering the Art of MacBook Air Screen Capture
- [New] Principles of Momentum Reversal in Filming
- [Updated] 2024 Approved Social Media Showdown Continues The Ongoing Debate on IGTV and YouTube
- [Updated] Core Principles for Online Storytelling Craftsmanship
- [Updated] In 2024, Circulating Content The Art of Playlist Sharing
- [Updated] YouTube's Landscape Decoded Creating Your Signature Style and Voice
- AI-Enabled MSI Desktops with Front-Mounted 1080P Touch Screens for Interactive Experience
- Asus ROG NUC - Core Ultra 7 155H & RTX Grog Nuggets 4060 GPU for an Entry-Level Price of $1,629
- Avoiding Delamination in 3D Print Projects: A Comprehensive Guide
- Best STM32QEG Kit Bundles Featuring Grove Plug-In Modules, Perfect for Raspberry Pi & Arduino - Latest 2 Cuisine
- Build Your Dream Rainbow Computer with Hyte's Revolutionary Nexus Link for RGB Devices
- Can't play MP4 files on Xperia 1 V
- Celebrating Creality's 10Th Anniversary with the New Vibrant-Colored 3D Printer
- Creepy-Crawly Crisis: PC Overrun by Fire Ants Eating Thermal Paste, Gamer's Nightmare Revealed in Vivid Pictures
- Discover AMD's Five Revolutionary New Processors: Superior Computing Power Enhanced by Strix & Kraken Tech Innovations
- Effortlessly Design Your Dream Rainbow PC Using Hyte's Nexus Link Ecosystem
- Expert Insights on Tech From Tom's Systems Guide
- Exploring the Future of PC Cooling with ADATA at Computex - New Power Supplies & Groundbreaking PCI Express 5.0 Solid State Drives Revealed
- Fast & Economical: Snag Your Elegoo Neptune 4 Pro Today for Up to 20%% Quicker and Save $75
- FX360 Pro From ID-Cooling: Exceptional Cooling Solutions at Just $60 – Detailed Review
- Get Ready for Innovation - Bamboo Lab Unveils A1, The Speedster Bed Slinger on Dec. 14Th
- How to Maintain and Declogs Your 3D Printing Equipment Effectively
- In 2024, Dose Life360 Notify Me When Someone Checks My Location On Oppo A1 5G? | Dr.fone
- In 2024, How Do I Stop Someone From Tracking My Apple iPhone XR? | Dr.fone
- Instagram Edge Adjusting FCPX to Vertical Footage
- Lamptron's Latest ST060 CPU Cooler: A Mighty Large 6-Inch Display Matching iPhone 15 Specs and Acts as an Extra Screen
- Looking For A Location Changer On Google Pixel 8? Look No Further | Dr.fone
- Navigate Your Next Purchase with Confidence Using Tom's Hardware Insights
- Navigating Tech with Tom's Hardware Insights
- Navigating the Financial Waves: AMD's Diverging Fortunes with Gaming Revenues Down 59%%, Data Center Sales Up 115%%
- New No iMovie? No Problem! Top 5 Free Online Video Editors for 2024
- New The Art of Synchronized Streams Implementing Smooth Volume Level Changes Using OBS
- Optimal PSU Selection for Effective Etherium & Bitcoin Mining Operations: Best Picks Reviewed
- Pro's 5 Virtual Helmets A Drone Racer's Choice for 2024
- Reasons for Infinix Hot 30i Stuck on Startup Screen and Ways To Fix Them | Dr.fone
- Reliability Boost: Intel Announces Increased Warranty Term for 13Th and 14Th Gen Core CPUs Facing Stability Setbacks
- Resonant Revelry Auditory Additions to WhatsApp Statues
- Save Big on Phrozen Mini 8K S Resolution 3D Printer - Now at Just $325!
- The Essential Resource for Enthusiasts: Tom's Hardware Explored
- The Noctua NH-D15 G2 Reborn: Silent Airflow & Superior Heat Dissipation with Revamped Design
- The Premier Selection of X570 Chipset Boards: Leading AMD AM4 Motherboards Reviewed and Compared
- The Ultimate Resource for Computer Enthusiasts - Tom's Hardware Experts
- Top Rated 3D Printing Devices : Choosing Between FDM, Resin & Budget-Friendly Options
- Top Rated External HDD Drives & SSD Encasements
- Ultimate Guide to Top USB-C Laptop Chargers with Efficient GaN Technology
- Unbeatable Price: Elegoo Neptone 4 Pro Laser Cutter - Just $284!
- Unbeatable Price: Elegoo Neptone X4 Pro Only $284 Awaits You!
- Unveiling Tech Secrets: Tom's Authoritative Hardware Analysis
- Unveiling the Latest in Digital Gadgets with Tom's Guidance
- Unveiling the Latest in PC Gear with Tom's Equipment Insights
- Updated Take Your Videos to the Next Level Professional 1080P Video Editing Tools
- Water Cooling Unleashes Power: The Ryzen 9 9950X Secures 5Th Fastest CPU Title, Behind Xeon and Threadripper in Extreme Benchmarks!
- Title: Master the Art of Keeping a Clean Nozzle on Your 3D Printing Device
- Author: George
- Created at : 2024-08-23 12:56:35
- Updated at : 2024-08-24 12:56:35
- Link: https://hardware-tips.techidaily.com/master-the-art-of-keeping-a-clean-nozzle-on-your-3d-printing-device/
- License: This work is licensed under CC BY-NC-SA 4.0.